There is a total range of Lexmark and IBM printer error codes. In case you uncover it troublesome to diagnose which is which, then this is a primer that may help you out!
Error code 22: Out of paper
This would possibly level out each a paper jam or a shortage of paper in your IBM and Lexmark printer. Make sure there could also be ample paper loaded into the paper tray and likewise look at if there are any sediments collected alongside the path of paper. Confirm to see if the sensor flag for enter is broken or not and likewise be sure the system boards and cable 2 simply is not defective.
Error code 31: Paper change needed
Which implies that your Lexmark and IBM printer has a particular paper measurement configuration from what’s needed inside the software program program. Remember to range the paper settings to manage the dimensions. Moreover look at the printer software program program setup for any factors along with the system board for any fault.
Error codes 41 and 43: Font related
These error codes usually level out that the precise font needed simply is not on the market inside the Lexmark and IBM printer. This would possibly signal a faulty font card or a fault contained within the system board. It might also indicate that the font card had been eradicated whereas the ability was switched on. If the font card is flawed make certain that to get a model new one.
Error code 54: serial error
This error code signifies that the settings for the serial configuration between your laptop computer and your printer are fully totally different. Make sure the communication cable, I/O cable and system boards aren’t damaged or improperly linked.
Error code 89: Overloaded output tray
This error code implies that your output tray is completely full. Remember to take out paper from the output tray. You moreover have to look at the operability of the respective flags. You may even try altering the image sensor for the cardboard.
Error code 9920: Fuser not as per temperature
For this error code it is important to observe the resistance on the fuser along with on the thermo fuse, lamp and the thermistor. There’s additionally a problem with low voltage. Confirm if there could also be continuity inside the cable 1 of the system along with inside the ability cable contained within the fuser.
Error code 970: improper turning on the fan
Which implies that the fan contained within the Lexmark and IBM printer simply is not turning on. You’d try to reseat the cables that lie between the system board and the fan. Moreover try resetting the printer.
Error code 24: Incorrect information feed
This error code might come up due to various causes. In case you’re attempting to put the paper inside information feed on the equivalent time the printer is taking off paper from the paper tray then the error might occur. Remember to not put paper inside information feed until and besides it has been explicitly requested.
Provide by James Kara Murat